![]() ![]() ![]() RS690 PCI to PCI Bridge (PCI Express Port 2)Ġ0:07.0 PCI bridge: Advanced Micro Devices, Inc. RS690 PCI to PCI Bridge (Internal gfx)Ġ0:06.0 PCI bridge: Advanced Micro Devices, Inc. ![]() RS690 Host BridgeĠ0:01.0 PCI bridge: Advanced Micro Devices, Inc. Unlike with the S400 there is no socket.Ĭlick for the output from the linux lspci command:Ġ0:00.0 Host bridge: Advanced Micro Devices, Inc. I haven't totally dismantled my S450 but it looks to me like the CPU is mounted directly Sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp lmģdnowext 3dnow rep_good cpuid extd_apicid pni cx16 lahf_lm extapic cr8_legacy 3dnowprefetch vmmcall The S450 is fitted with an AMD Sempron 200U CPU clocked at 1GHz. The interface plug is a standard 5.5mm/2.5mm coax plug. The label on the case says 20V 3.25A but I did notice that the motherboard manual says '19V +/- 10%'. The S450 uses an external power supply - needless to say my example came without one. Undo two screws on the back and then the top cover and front panel slide forwards and then can This is easy - although it had me flummoxed for a while as a snap assumption I made was wrong. The datasheet gives the OS as 'eLux RL - Embedded Linux' My S450 came with no flash or RAM fitted. Version, not the S version which has a slightly higher spec.) Searchįor D2963 and you will find some datasheets on the Fujitsu website. The '-2' variant was fitted with a 1GHz AMD Sempron 200U CPU and it is '-2' thatįrom a label on the board it would appear that the mini-ITX board is a D2963-B11 GS2. ![]() I did find a 'Brief Instructions' document for the S450-2 on the Fujitsu website datedĭecember 2009. The S450 was fitted with an 800MHz AMD Sempron TF20 processor. It would appear that the S450 was launched at the beginning of 2009 and, like various otherįutro thin clients, was based on a mini-ITX sized motherboard. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |